Have your ever wanted to have an attractive wood fireplace but been put off by the need for an expensive remodelling of your house? Now, thanks to Masport, almost any wall can be quickly and safely converted to accommodate a wood fireplace with the Masport zero clearance (ZC) range of wood heaters. The Masport ZC range enables you to have a wood fireplace installed into almost any wall, while protecting floors and walls constructed from combustible materials, as you can see from the diagrams. And they are easy to install too, making them ideal for houses under construction, or for renovating an existing home. All Masport inbuilt wood fires are ZC capable.
Masport wood heaters say this - "The key to an efficient, long-lasting fire lies in the design and construction of a superior firebox. Each features an advanced panel design with an array of heat dispersing fins that can increase a surface area of the firebox by up to 65%. The result is a superior wood fire that transfers heat through the cast iron firebox and passes directly into the fins. The depth of a Masport cast iron firebox is 8-10mm plus the height of the fins (approx. 30mm). This extra cast iron surface area is the key. While heating a greater surface area the volume of heat being transferred into the room is significantly increased. It will heat large volume areas and store and distribute warmth long after the fire has died down. All Masport Wood Fires have been built with an exclusive Triple Air Combustion system designed to efficiently burn all of the fuel put in the fire. Primary air comes through the high/low control, secondary air passes through the ‘air wash’ which helps keep the glass clean, and tertiary air comes from below the door to ensure complete combustion. This means less fuel, less cost for a lot more heat.