Abbey logo trans small

Trading Hours

MON - FRI   9am - 5pm
SAT   9am - 1pm

Fireplace accessories

Fire accessories

DaVinci Fireplaces

side bar DaVinci 1

Focus fireplaces

focus 1a

Outdoor gas fires

outdoor gas fire 1

Lopi gas fires

Lopi gas fireplaces

Regency gas heaters

Regency gas fireplaces

 

HEATMASTER PRICES & SIZES

Heatmaster wood fireplaces prices and sizes

HEATMASTER WOOD FIREPLACE SIZES & PRICES - are listed here, click on the small pic on the left. The Heatmaster Z 1200 is available only in the uninsulated 'B' series and is made per order so allow extra time for manufacture and delivery.

 

Heatmaster open wood fireplaces prices and options 

 

Heatmaster open wood fireplaces fascia prices

dimensions a series1 dimensions a series2

 

DIMENSIONS 'A' SERIES (INSULATED)

Model # A B C D E F G H Active Flue
A450 595 395 670 195 205 195 90 100 150
A650 840 470 680 315 230 315 155 110 175
A750 910 495 680 325 260 325 140 95 200
A900 1060 565 740 400 260 400 180 125 200

 

dimensions bseries 1 dimensions b series2

 

DIMENSIONS 'B' SERIES (UN-INSULATED)

Model # A B C D E F G H I J Active Flue
B450 590 340 575 670 485 160 165 160 60 115 150
B650 806 380 595 647 680 247 185 247 85 110 175
B750 905 435 635 685 785 287 210 287 105 120 200
B900 1055 480 695 730 935 362 210 362 125 145 200

 

HEATMASTER WOOD FIREPLACE INSTALLATION REQUIREMENTS

Heatmaster wood fireplaces installation requirements

HEATMASTER WOOD FIREPLACE INSTALLATION REQUIREMENTS - can be viewed by clicking the small pic on the left. Heatmaster Outdoor Lifestyle Designs present an exciting way to liven up the great outdoors CLICK HERE to view.

Heatmaster B Series wood fireplaces dimensions

Heatmaster A Series wood fireplaces dimensions

Brick installation - Building a fireplace

Heatmaster B Series brick fireplace
  1. Lay brickwork to hearth level.
  2. Place Heatmaster in position on hearth.
  3. Lay brickwork to lintel level and place lintel.
  4. Install first length of flue.
  5. Lay brickwork to ceiling level.
  6. Install additional lengths of flue and roof flashing.
  7. Fix cowl to top of flue.
  8. Light your fire.

 

Brick Installation - Renovating an existing fireplace.

reno exploded reno exist
  1. Clean out existing opening, removing old fireplace, raise lintel and renovate hearth as required. Dimensions shown are the minimum openings necessary. Install flue into chimney.
  2. Push Heatmaster into opening and connect flue and cowl. The fireplace is now complete except for any decorative treatment you may desire.
  3. Optional decorative facing may now be affixed if required.

 

 Zero Clearance Installations

 heatmaster b6b 1 heatmaster b6b 2   heatmaster b6b 3
 heatmaster b6a
  1. The starting point for your new Heatmaster open fireplace is picking the location, a spare section of wall space or perhaps an unused corner. After selecting your fireplace, size the opening appropriately conforming to the relevant clearances and erect frame.
  2. Install selected insulated Heatmaster firebox ( 'A' series ) on approved hearth and add flue sections penetrating ceiling.
  3. Enclose framing with plasterboard/gyprock or timber panelling ( we recommend villaboard ) again ensuring approved clearances are maintained. ( sides 25mm, top 100mm & rear 25mm)
  4. Choosing from the vast range of decorative or plain fascias and mantelpieces available, you can complete your fireplace in any style you desire.

 

 

 

HEATMASTER FREESTANDING WOOD FIREPLACE 

Heatmaster A Series freestanding open wood fireplaces

HEATMASTER FREESTANDING - The Heatmaster freestanding wood fireplace presents an attractive modern style without the need to construct a surround or enclosure. The outer casing is made for the A450, A650, A750, and A900 fireboxes and is available in stainless steel or black.

The Heatmaster freestanding is the 'A' Series firebox
plus the outer casing in black or stainless steel.

Heatmaster A Series freestanding open wood fireplace stand

Heatmaster A Series freestanding open wood fireplace dimensions

ACCESSORIES

Outer casing for 'A' series painted black ( for freestanding style )  
Outer casing for 'A' Series stainless steel ( for freestanding style )  
Screens (all except Z1200)  
Screens Z1200  
Arch lintels (all except Z1200)  
Heat deflector for mantelpiece app.  

 

 

 

HEATMASTER WOOD FIREPLACE FLUEING REQUIREMENTS

Heatmaster wood fireplace flue systems

Heatmaster wood fireplace flue systems and components 

HEATMASTER FLUEING - Depending on the type of installation, the flue system will vary. If you are installing into an existing masonry fireplace or you intend to build a masonry enclosure and chimney then an active flue run is all you need with one outer flue and cowl at the top. If you want a zero clearance 'boxed in' with timber frame then a triple flue system is required.

The Heatmaster freestanding can be installed with a single flue to ceiling level where it must become a *triple system through the roof. However, if you are using a stainless steel flue, you may consider using double skin as the active flue will darken to a bronze-like colour after a while. A min 3.6 metre flue kit is required.

The Heatmaster inbuilt 'B' series is designed for a full masonry enclosure and chimney and only requires a single active flue to the top of the chimney where it should have at least one outer flue and the correct size anti-downdraught cowl. The top section should be totally waterproofed.

The Heatmaster inbuilt 'A' series is designed as a zero clearance unit to be housed in cabinetry or a timber framed enclosure. All zero clearance wood heaters must be triple flued from heater to hat. Check flue sizes below as the different sized boxes run different size flues.

Heatmaster 450..................6" or 150mm
Heatmaster 650..................7" or 175mm
Heatmaster 750..................8" or 200mm
Heatmaster 900..................8" or 200mm

* When we refer to a triple system, we have one active flue with two outer casings or outer flues with a 2 inch diameter difference between them and spacers over a longer run. So if you are running a heater with a 6" or 150mm spigot then you would also run an 8" and 10" through any combustible penetration.

PLEASE CONTACT US IF YOU ARE NOT SURE

 

lopi_liear_gas_fireplace

Gas fireplaces are available in two styles, the open gas convection boxes or the glass fronted sealed units. Some are available with pebbles, logs or coals and generally the sealed gas fires are the more efficient.

Gas fireplaces are all different in their installation and flueing requirements but all these specifications are listed on the heater pages. If you're not sure, contact us .

The gas fireplaces listed on these pages are all tested and approved for the Australian market and all are flued so you won't have any problems with emissions or unburned gas fumes escaping into your living space.

Some of these gas flame fires are extremely efficient and some not so. You will notice that some companies call their fireplaces 'decorative' or 'ambient'. This means that not a great deal of heat is produced but they are intended more as a visual fireplace and there are some great looking styles available. Check on the relevant gas heater pages as the output or heating capacity will be listed. Most gas fires are available as zero clearance for flexibility of installation.

The gas fire brands we sell are Escea, Lopi, Regency, DaVinci, Kalfire and Ortal 

We know that most of you will want great looks and plenty of heat so there is a good selection here that will meet both criteria and most importantly, they are available at the right price. If you find a better price on anything on these pages, let us know - we'll beat it!

wood heater front page

The wood heaters represented on these pages are the best quality available in Australia today!

We are constantly researching fireplaces of all descriptions and we are confident that all the wood heaters and gas fires on these pages are the best in their class and will provide long and trouble free service.

The wood heater manufacturers listed here have different style heaters so the following guide will help. The four main styles of wood heaters are :-

  • Freestanding wood heaters.....Morso, Lopi, Regency, Hergom, Invicta, ADF, Clean Air, Jindara, Eureka, Focus, Austroflamm and Heatmaster
  • Inbuilt wood heaters.....Regency, Lopi, Eureka, Heatmaster, Jindara, Hergom and Clean Air
  • 2 door....Only Eureka and Jindara.
  • Zero clearance....Regency, CleanAir, Jindara, Eureka and Heatmaster.
  • Suspended....Focus.

All these styles can be achieved with open fireboxes or the all time favorites, the slow combustion wood heater. All except 2 door of course, which are available only as slow combustion (or wood heater with a sealed door).

Zero clearance wood fires are simply insulated fireboxes that are designed to be 'boxed' into a timber or metal framed surround and triple flued to create the inbuilt fireplace look. Some like the Heatmaster A series insulated fireboxes can also be freestanding.

Almost every fireplace requires some accessories such as a fire screen and fire tools and some just need a good dress up. Have a look through our 'General Information' section for all your fireplace accessories and general fireplace information.

The fireplace accessories section contains everything you may need for your fireplace operation and maintenance. 
Fireplace mantelpieces are available for most applications but please check with us for current status.

Abbey Fireplaces also represent wood fired and electric cookers by Esse and Thermalux

All gas fires should be installed by an accredited tradesman in accordance with local codes if any or to ANSI Z223.1 - 1992 and NFPA 54(88) and the requirements listed in the owners manual.

All wood heater installations should be carried out by a licenced tradesman in accordance with AS 2918.

Front page gallery 3 GIFjpg

ABBEY FIREPLACES SYDNEY
28A Roger Street, Brookvale, NSW 2100
Ph (02) 9939 9848

brookvale@thefireplace.com.au

ABBEY FIREPLACES SOUTH COAST
136 Industrial Road, Oak Flats, NSW 2529
Ph (02) 4256 5555

illawarra@thefireplace.com.au

ABBEY FIREPLACES CENTRAL COAST
2/22 Reliance Drive, Tuggerah, 2259
Ph 0466 200 785

centralcoast@thefireplace.com.au